Water Jet Cutting: The History

The term “Water Jet” might be something that you don’t get to hear often, but you can easily guess what it relates to. The number one aspect that will pop into your mind is water shooting at a high pressure, and you are right because that is the major purpose, but there is a lot where that came from. When we relate it to different moments like getting hit by the sun light at the beach or getting showered by the old garden hose, you can even consider the destruction caused by floods. Water jet cutting services have the power to wash away the hardest of the rocks and to corrode sides of mountains.

Speaking of garden hose:

We never appreciate garden hoses enough, they contain a lot of pressure and that rate or pressure cannot be found anywhere. How about assuming that the water will be executed through a smaller hole with higher pressure? Add a twist and mix all of that with an abrasive element such as the garnet, and there you have a new tool invented which would cut a hole through many different substances. All of these machines contain the tendency to cut through different variety of hardcore substance and much more.

When we talk about erosion, this is all caused by water jet cutting. It all began in the 1800’s that is when hydraulic coal was the ideal solution for mining in various areas of Soviet Union and New Zealand. Water from streams was used by the miners and they used to blast it over a rock face, this technique was used for carrying away all of the loose rocks and coal.

Now, if we talk about the California Gold Rush (1853 to 1886), water released from high pressure pipes were used for excavating soft gold rocks from the mines and that is how it all started. Also, it allowed the miners to take a step back from the component being washed, and this provided safety for all of the workers. Later, these experiments were taken up in Asia and Europe by the 1900’s, and the Russians cut rock with pressurized water in the 1930’s for the first time.

However, in the 1950’s, there was a forest engineer who first experimented to cut lumber with the use of an early cutter. On the other hand, when we talk about water jet cutting, it was not much known until in the 1970’s. The water jet cutting industrial cutter was first developed and installed in 1972. Other modifications were also made in the 1980s, when abrasive water jets were developed. The power of the table was increased at a higher level, and this enabled more materials to be cut.

There are some other kinds of water jets such as percussive jets, which are equipped with rapid pulsing jets that cut different materials, fill cavities with high powers, and then they immediately collapse. This industry has improved a lot with their constant inventions of new ways like Wallan Engineering Company.